STROKER ENGINE - CRATE MOTOR - STROKER KITS - NC CUSTOM STROKER ENGINES
Technical Specs
- Engine Model - 540 A-1
- Horsepower - 700 HP
- Torque - 650 Ft Lbs
- Bore and Stroke - 4.500 x 4.250 Inches
- Compression Ratio - 10:1
- Fuel - Premium pump gas
- Crankshaft - 4340 Forged Steel
- Connecting Rods - 4340 Forged H-Beam
- Pistons - Forged
- Rings - File fit plasma moly
- Block - DART, your choice of color
- Camshaft - Solid roller
- Lifters - Solid roller
- Timing Set - Performance, dual roller chain
- Harmonic Balancer - Professional Products
|
- Oil Pump - Melling standard volume
- Oil Pan - Custom
- Heads - Dart Pro 1 Aluminum
- Head Bolts - ARP
- Valves - Stainless steel
- Springs - Dual with dampner
- Rocker Studs - ARP 7/16 diameter screw in type
- Rocker Arms - Aluminum full roller, 1.7 ratio
- Pushrods - 3/8 Hardened steel with guide plates
- Intake Manifold - Dart Aluminum open plenum, 4150 carb mount
- Valve Covers - Chrome stamped
- Spark Plugs - Autolite 3922
- Oil Filter - Fram PH5 or comparable
- Ignition Timing - 32 degrees at 4,000 RPM
- Oil Type - Mineral based
|
Labor Details
- All parts hand cleaned
- Block sonic checked for thickness
- Block pressure tested @ 40 psi
- Block stroker clearanced
- Block square decked with BHJ fixturing
- Oil gallies tapped for screw in plugs
- Aligned honed mains
|
- Bored and honed with torque plates
- All clearances checked to the nearest .0001"
- Rotating assembly balanced
- Engine blueprinted with specs sheet on file
- Engine fully dressed to customer specifications
- Dyno tested with actual results supplied to customer
- 1 year 12,000 mile warranty
|
Upgrade Options
- Jesel Shaft Mounted Rockers - $595
|
- Other Upgrades Available. Please Call or Email For Pricing.
|
More Turnkey Options
- MSD HEI Distributor - $199
- MSD Distributor - $269 (requires additional coil & ignition box)
- 8mm Wires and Loom Kit - $99
- Custom Built Holley 850 Carb by AED - $505
- SFI Approved Flexplate (auto trans) - $69
- SFI Approved Flywheel (manual trans) - $199
|
- Centerforce II Pressure Plate - $189
- Centerforce II Clutch Disc (10 or 26 Spline) - $89
- Mini Starter - $149
- Other Accessories and Pulley Kits Available!
- If we are missing something you are looking for, call or email for a free quote!
|
T AND L ENGINES, IN CONJUCTION WITH PRESTIGE MOTORSPORTS, CAN NOW OFFER A COMPLETE PACKAGE FOR YOUR VEHICLE INCLUDING TRANSMISSIONS, ENGINE MOUNTS, HEADERS, RADIATORS AND MUCH MORE.
CONTACT US FOR MORE DETAILS!
